/
By leveltek
/
Capabilities & Equipment
Coil to Coil Stretch Level
Entry Weight Max |
44,000 lbs. |
Gauge Range |
.015″ to .250″ |
Width Range |
10″ to 50″ |
Max Coil OD – In |
72″ |
Max Coil OD – Out |
72″ |
ID – In |
20″, 24″ 30″ |
ID – Out |
20″, 24″ |
Min Length |
150 feet |
Substrates |
All |
Sample Size |
12″ x width |
Extras |
PVC, paper interleave, line marking (7 lines) |
Trim / Strand / Slit
Entry Weight Max |
22,000 lbs. |
Gauge Range |
.015″ to .125″ |
Special Gauges |
.187″ on 50″ OD or bigger |
Width Range |
22″ to 60″ |
ID- In |
16″, 20″ |
ID – Out |
20″ |
Min Trim |
.500″ |
Max One Pass Trim |
8″ |
Substrates |
All |
Sample Size |
12″ x width |
Extras |
Paper interleave, line marking (7 lines) |
Light Gauge Line
Entry Weight Max |
30,000 lbs. |
Gauge Range |
.023″ to .159″ annealed stainless |
Gauge Range |
.023″ to .135″ aluminum |
Width Range |
15″ to 60″ |
Max Coil OD – In |
70″ |
ID- In |
20″ |
ID – Out |
N/A |
Length Range |
36″ to 240″ |
Length Tolerance |
+/- 1/32 |
Substrates |
All but hot band (nothing dirty) |
Notes |
Inquire on lighter gauges |
Inspection |
surface critical – top side only |
Back-Off |
under .159″ only |
Max Skid Wt |
20k lbs. under 240″ lengths |
Extras |
PVC, paper interleave, line marking (7 lines) |
Orbital Wrap |
min length 8 feet |
Wide Line
Entry Weight Max |
80,000 lbs. |
Gauge Range |
.090″ to .500″ annealed stainless/carbon |
Gauge Range |
.125″ to .500″ 2B and polished stainless |
Gauge Range |
.125″ to .500″ aluminum – bright |
Gauge Range |
.090″ to .500″ aluminum – milled finish |
Width Range |
36″ to 96″ nominal, under 36″ inquire |
Max Coil OD – In |
85″ |
Min OD |
38″ on gauges under .250″ |
Min OD |
40″ on gauges over .250″ |
ID – In |
20″, 24″, 30″ |
Length Range |
48” to 600″ – inquire over 600″ |
Length Tolerance |
+ 1/8 / -0 |
Substrates |
All |
Samples |
12″x width on ctl/no samples coil to coil |
Inspection |
surface critical – top side only |
Back-off |
under .250″ only, min OD |
Rotary Entry End Shear |
.080″ to .500″ |
Max Skid Wt |
10k lbs. over 600″ lengths |
Max Skid Wt |
20k lbs. under 240″ lengths |
Extras |
PVC, paper interleave, line marking (7 lines) |
Orbital Wrap |
min length 8 feet |
Leveltek has proven success for stretch leveling the following products:
- Bright Annealed
- Painted Plated/clad
- Polished/buffed
- Patterned / Perforated
- Embossed/coined
- Galvalume
- Laser Quality Sheet
Our non-marking grippers are perfect for surface critical applications, such as:
- Stainless Steel
- Titanium
- Aluminum
- Brass
- Copper
- High Temp Alloys
- Galvanized Steel
- Nickel Alloys
- Treadplate
- Coated Carbon Steel