Coil to Coil Stretch Level
Entry Weight Max | 44,000 lbs. |
Gauge Range | .015″ to .250″ |
Width Range | 10″ to 50″ |
Max Coil OD – In | 72″ |
Max Coil OD – Out | 72″ | ID – In | 20″, 24″ 30″ | ID – Out | 20″, 24″ | Min Length | 150 feet | Substrates | All | Sample Size | 12″ x width | Extras | PVC, paper interleave, line marking (7 lines) |
Trim / Strand / Slit
Entry Weight Max | 22,000 lbs. |
Gauge Range | .015″ to .125″ |
Special Gauges | .187″ on 50″ OD or bigger |
Width Range | 22″ to 60″ |
ID- In | 16″, 20″ |
ID – Out | 20″ | Min Trim | .500″ | Max One Pass Trim | 8″ | Substrates | All | Sample Size | 12″ x width | Extras | Paper interleave, line marking (7 lines) |
Light Gauge Line
Entry Weight Max | 30,000 lbs. |
Gauge Range | .023″ to .159″ annealed stainless |
Gauge Range | .023″ to .135″ aluminum |
Width Range | 15″ to 60″ |
Max Coil OD – In | 70″ |
ID- In | 20″ |
ID – Out | N/A | Length Range | 36″ to 240″ | Length Tolerance | +/- 1/32 | Substrates | All but hot band (nothing dirty) | Notes | Inquire on lighter gauges |
Inspection | surface critical – top side only |
Back-Off | under .159″ only |
Max Skid Wt | 20k lbs. under 240″ lengths |
Extras | PVC, paper interleave, line marking (7 lines) |
Orbital Wrap | min length 8 feet |
Wide Line
Entry Weight Max | 80,000 lbs. |
Gauge Range | .090″ to .500″ annealed stainless/carbon |
Gauge Range | .125″ to .500″ 2B and polished stainless |
Gauge Range | .125″ to .500″ aluminum – bright |
Gauge Range | .090″ to .500″ aluminum – milled finish |
Width Range | 36″ to 96″ nominal, under 36″ inquire |
Max Coil OD – In | 85″ |
Min OD | 38″ on gauges under .250″ |
Min OD | 40″ on gauges over .250″ |
ID – In | 20″, 24″, 30″ |
Length Range | 48” to 600″ – inquire over 600″ |
Length Tolerance | + 1/8 / -0 |
Substrates | All |
Samples | 12″x width on ctl/no samples coil to coil |
Inspection | surface critical – top side only |
Back-off | under .250″ only, min OD |
Rotary Entry End Shear | .080″ to .500″ |
Max Skid Wt | 10k lbs. over 600″ lengths |
Max Skid Wt | 20k lbs. under 240″ lengths |
Extras | PVC, paper interleave, line marking (7 lines) |
Orbital Wrap | min length 8 feet |
Leveltek has proven success for stretch leveling the following products:
- Bright Annealed
- Painted Plated/clad
- Polished/buffed
- Patterned / Perforated
- Embossed/coined
- Galvalume
- Laser Quality Sheet
Our non-marking grippers are perfect for surface critical applications, such as:
- Stainless Steel
- Titanium
- Aluminum
- Brass
- Copper
- High Temp Alloys
- Galvanized Steel
- Nickel Alloys
- Treadplate
- Coated Carbon Steel