Capabilities & Equipment

Entry Weight Max	44,000 lbs.
Gauge Range	.015″ to .250″
Width Range	10″ to 50″
Max Coil OD – In	72″
Max Coil OD – Out	72″
ID – In	20″, 24″ 30″
ID – Out	20″, 24″
Min Length	150 feet
Substrates	All
Sample Size	12″ x width
Extras	PVC, paper interleave, line marking (7 lines)

Entry Weight Max	22,000 lbs.
Gauge Range	.015″ to .125″
Special Gauges	.187″ on 50″ OD or bigger
Width Range	22″ to 60″
ID- In	16″, 20″
ID – Out	20″
Min Trim	.500″
Max One Pass Trim	8″
Substrates	All
Sample Size	12″ x width
Extras	Paper interleave, line marking (7 lines)

Entry Weight Max	30,000 lbs.
Gauge Range	.023″ to .159″ annealed stainless
Gauge Range	.023″ to .135″ aluminum
Width Range	15″ to 60″
Max Coil OD – In	70″
ID- In	20″
ID – Out	N/A
Length Range	36″ to 240″
Length Tolerance	+/- 1/32
Substrates	All but hot band (nothing dirty)
Notes	Inquire on lighter gauges
Inspection	surface critical – top side only
Back-Off	under .159″ only
Max Skid Wt	20k lbs. under 240″ lengths
Extras	PVC, paper interleave, line marking (7 lines)
Orbital Wrap	min length 8 feet

Entry Weight Max	80,000 lbs.
Gauge Range	.090″ to .500″ annealed stainless/carbon
Gauge Range	.125″ to .500″ 2B and polished stainless
Gauge Range	.125″ to .500″ aluminum – bright
Gauge Range	.090″ to .500″ aluminum – milled finish
Width Range	36″ to 96″ nominal, under 36″ inquire
Max Coil OD – In	85″
Min OD	38″ on gauges under .250″
Min OD	40″ on gauges over .250″
ID – In	20″, 24″, 30″
Length Range	48” to 600″ – inquire over 600″
Length Tolerance	+ 1/8 / -0
Substrates	All
Samples	12″x width on ctl/no samples coil to coil
Inspection	surface critical – top side only
Back-off	under .250″ only, min OD
Rotary Entry End Shear	.080″ to .500″
Max Skid Wt	10k lbs. over 600″ lengths
Max Skid Wt	20k lbs. under 240″ lengths
Extras	PVC, paper interleave, line marking (7 lines)
Orbital Wrap	min length 8 feet

Leveltek